| RS4 Straight Pull 6 bolt Front Hub |
- Weight 157g (QR version)
- Available in QR,12 or 15mm axle options
- Available in 6 different colour options
|
| RS4 Straight Pull 6 bolt Rear Hub |
- Aluminium Freehub
- Shimano or Campag freehub body options
- 9/10/11 speed
- 2 pawl ratchet
- Available in 24 hole straight pull only
- Weight 257g with Shimano freehub
- Colour Black, Silver, Red, Blue, Purple and Orange
|
| RS4 Road Rear Hub |
- Aluminium Freehub
- Shimano or Campagnolo compatible
- 9/10/11 speed
- 2 pawl ratchet
- Available in 20, 24, 28, 32 and 36H
- Colour Black, Silver, Red, Blue, Purple and Orange
|
| RS4 Road Front Hub |
- Sealed Stainless Steel cartridge bearings throughout
- Machined from forged 2014 T6 aluminium billet
- Front hole drilling 16, 18, 20, 24, 28, 32 and 36
- 100mm axle width
- Colour Black, Silver, Red, Blue, Purple and Orange
- **NOTE** We do not recommend radial spoke builds on hubs with a hole drilling above 24 holes.
|
| RS4 Centre Lock Front Hub |
- Available in 24, 28 and 32h
- Colour Black, Silver, Red, Blue, Purple and Orange
- Sealed Stainless Steel cartridge bearings
- Hub shell machined from forged aluminium billet
- Centre lock disc spline
- Unsurpassed reliability
- Weight
|
| RS4 Centre Lock Rear Hub |
- Aluminium Freehub
- Shimano or Campagnolo compatible
- 9/10/11 speed and Campag compatible
- 2 pawl ratchet
- Available in 24, 28 and 32h
- Colour: Black, Silver, Red, Blue, Purple and Orange
|
| RS4 Straight pull Centre Lock Front Hub |
- Available in 24h only
- Colour Black, Silver, Red, Blue, Purple and Orange
- Sealed Stainless Steel cartridge bearings
- Hub shell machined from forged aluminium billet
- Centre lock disc spline
- Unsurpassed reliability
- Weight
|
| RS4 Straight pull Centre Lock Rear Hub |
- Aluminium Freehub
- Shimano or Campagnolo compatible
- Sealed Stainless Steel cartridge bearings
- Hub shell machined from forged aluminium billet
- Centre lock disc spline
- Unsurpassed reliability
- Weight
|
| SCS – SP24 Rear Hub |
- Sealed Stainless Steel cartridge bearings
- Hub shell machined from forged aluminium billet
- Standard 6 bolt disc fitting
- 12mm axle x 135mm width
- Available in black only.
- Note – Not QR compatible
Due to the unique rear frame design on Specialized SCS bikes we have produced a dedicated hub. The hub body has been reduced by 2mm to keep a perfect chainline, unlike many aftermarket solutions. The hub is then mated with specific 12mm through axle endcaps to suit the 135mm dropout.
|
